The Plumb Guard™ is an essential tool for ensuring the safety of plumbers when working with metal water pipes that may carry dangerous electrical currents. To keep your Plumb Guard™ in optimal working condition, regular maintenance and proper care are crucial. Below are some practical tips to help you maximize the efficiency and lifespan of your Plumb Guard™.

1. Use the Provided Charge Cable

To maintain the battery’s health and ensure proper charging, always use the provided charge cable. Using alternative cables could harm the battery or result in improper charging, which can impact the performance of your Plumb Guard™.

2. Keep It Charged and Ready

Before starting any job, ensure your Plumb Guard™ is fully charged. A fully charged battery guarantees that the device will operate correctly and provide the protection you need. Remember, it can take up to four hours to fully charge the battery if it has been completely discharged. Regularly checking the battery level and charging the unit as needed is a good practice.

3. Ensure No Dirt in the Cable Connection

To avoid charging issues or damage to the battery, ensure that the charging port and cable connections are free of dirt and debris. Keeping these components clean will help maintain a strong and reliable connection.

4. Store in a Dry Place and Out of Sunlight

Proper storage is key to extending the life of your Plumb Guard™. Always store the device in a dry, cool place, away from direct sunlight. Exposure to moisture and heat can damage the internal components and reduce the effectiveness of the device.

5. Avoid Leaving It in the Back of a Ute

While it might be convenient to leave your Plumb Guard™ in the back of your ute between jobs, this exposes the device to the elements, including sun, rain, and dust. To protect it from potential damage, always store it in a secure, sheltered place when not in use.

6. Keep the Lid Shut When Not in Use

To prevent dust, dirt, and moisture from entering the Plumb Guard™, always keep the lid shut when the device is not in use. This simple step helps protect the device’s sensitive components and ensures it remains in good working order.

7. Caring for a Wet Plumb Guard™

If your Plumb Guard™ becomes wet, take immediate action to protect the device:

• Turn off the device and unplug all cables.
• Dampen the exterior with a dry towel to remove excess moisture.
• Rest the device out of direct sunlight with the lid open to allow it to air dry.
• Do not close the lid until the device is completely dry.

By following these steps, you can prevent water damage and ensure that your Plumb Guard™ continues to function correctly.

8. Cleaning a Muddy Plumb Guard™

Working in muddy conditions can sometimes result in a dirty device. If your Plumb Guard™ gets muddy:

• Turn off the device and unplug all cables.
• Wipe down the exterior with a damp cloth, followed by a dry towel to remove any remaining dirt.
• Allow the device to dry out of direct sunlight with the lid open.
• Do not close the lid or store the device until it is completely dry and clean.

Regular cleaning helps prevent dirt from affecting the device’s performance and ensures it’s ready for use at all times.

9. Annual Servicing and Calibration

To ensure your Plumb Guard™ remains accurate and reliable, it’s important to have it serviced and calibrated annually. This annual check-up will:

• Confirm that the voltage detection accuracy is within the required limits.
• Update the device’s software to the latest version.
• Ensure the battery and other components are in good condition.

By following these maintenance and care tips, you can maximise the efficiency and lifespan of your Plumb Guard™. Regular cleaning, proper storage, careful charging, and annual servicing are simple but effective ways to ensure that your Plumb Guard™ remains in top working condition, ready to protect you and your staff in every job.